Accessories


  • Beluga HoseDrop Spraying System
    The Beluga HoseDrop is a customizable spraying system designed to spray between rows and inside the crop canopy. It combines lightweight flexible hosedrops with a unique low-profile nozzle body to be used in applications such as fertilizer sidedress, herbicide banding, or subcanopy crop spraying.


    More Information
  • TipGuard
    Protects the nozzle from mechanical damage
    Easier and faster mounting of AirMix and CVI nozzles
    Easy storage of nozzles by stacking TipGuard caps
    Nozzles, washers and caps stay all together


    More Information
    AMTG
  • Tank Adapter - easyFlow
    Partial dosing possible if needed
    Flow by gravity, no pump needed
    Large diameters for quick flow
    Easy to install and operate
    Wedge plates available to balance inclined tanks

    More Information
    EFTA55
  • Container Adapter - easyFlow
    Fast and complete rinsing of empty plant protection product containers
    No more contamination and cleaning of measuring jugs required
    Easy installation on all sprayer tanks and on most chemical inductors

    More Information
    EFJA65
  • Bulk Container Adapter
    Container adaptor with hose barb for connecting to bulk chemical containers.

    More Information
    EFJA64T
  • Wedge Plate Kit - easyFlow
    More InformationEFWP71
  • Handheld Weather Meter WM10
    Simple and accurate (+/-5%) measurement of wind speed in mph, kmh, m/s, or knots.
    • Range: 0.5-67mph
    • Lanyard included
    • Auto Power off
    • Water Resistant
    • Backlit LCD display
    WM10
  • Handheld Weather Meter WM20
    • Wind Speed
    • Temperature
    • Wind Chill
    (MPH, KPH, Knots, M/Sec, Ft/Min, Beaufort)

    Download Manual
    WM20
  • Handheld Weather Meter WM300
    • Wind Speed/ Temp/ Wind Chill
    • Digital Wind Direction in Degrees and Compass Points
    • Accuweather.com® patented
    Comfort Index™
    • Relative Humidity (no recalibration needed)
    • Dew Point
    • Wet Bulb
    • Delta T

    Download Manual
    WM300
  • Handheld Weather Meter WM200
    • Wind Speed / Temp / Wind Chill
    • Digital Wind Direction in Degrees and Compass Points
    • Backlight

    Download Manual
    WM200
  • Venturi
    The heart of the TurboDrop® nozzle; meters flow rate and injects air. Available in all poly or poly with ceramic metering orifice (for extended wear life).TDXLV005
    TDXLV/TDVC01
    TDXLV/TDVC015
    TDXLV/TDVC02
    TDXLV/TDVC025
    TDXLV/TDVC03
    TDXLV/TDVC04
    TDXLV/TDVC05
    TDXLV/TDVC06
    TDXLV/TDVC08
    TDXLV/TDVC10
    TDXLV15
  • DualFan Cap
    Allows DualFan spraying (10Ëš and 50Ëš angles) with standard tips, AirMix® nozzles, or as part of TurboDrop® DualFan nozzles. Includes DF cap, and two DF-SP8 tip clips.CADF
  • DualFan Tip Slider
    Part of the DualFan cap. Uses a friction fit and slides onto the cap securing the pattern tip or nozzle and either DF-ORAS or DF-ORAA gaskets.DF-SP8
  • DualFan Tip Clip Gasket (for AirMix or BP)
    Gasket to be used in conjunction with the DF-SP8 to mount an AirMix or BP nozzle tip to a DF Cap.DF-ORAA
  • Dual Fan Tip Clip Gasket (for SMP)
    Gasket to be used in conjunction with the DF-SP8 to mount an SMP nozzle tip to a DF Cap. EPDM construction.DF-ORAS
  • Quick Hollow Cone Spray Nozzle
    Quarter turn quick connect, hollow cone tip. For use with TurboDrop® Venturi or as a stand alone hollow cone tip.

    Polyacetal with EPDM seat gasket.
    QHC013
    QHC023
    QHC045
    QHC068
  • Acid-Resistant Cap
    Polypropylene cap.C06PP
  • Diffuser
    Quickly builds and ensures proper patternation. Use with 80° or narrower angle flat fan tips on TurboDrop® Venturi and with 110° tips that are more than double the size of the Venturi (as in the TDXL-D). EPDM and polyacetal construction.DIF4
  • Tip Strainer
    Tip strainer. Available in 24, 50, or 100 mesh variants.

    Polyacetal with stainless steel screen.
    TS24M
    TS50M
    TS100M
  • Gripper Tip Strainer
    Tip strainer with an integral seat gasket. Available in 24, 50, or 100 mesh variants.

    Polyacetal with stainless steel screen and EPDM gasket.
    GTS24M
    GTS50M
    GTS100M
  • Cap
    Polyacetal cap. ISO color coded.
    Polyacetal construction.
    C01
    C015
    C02
    C025
    C03
    C04
    C05
    C06
    C08
    C10
  • Gasket
    One-hole gasket. G125 is 3.0mm thick, G120 is 2.8mm thick and used between the DF or TCP caps and the TurboDrop Venturi.G120
    G125
  • Extension Adapter
    When used with DualFan nozzle, lowers the nozzle approximately 1” to clear obstructions on certain sprayers.EXAD
  • Quick Check Calibration Calculator
    Quickly and easily measures the amount of liquid being dispersed through spray nozzles, and calculates application rates. Can also be used to adjust nozzle flow rates, determine nozzle accuracy, and evaluate line pressure losses.

    Download Instructions
    QC02
  • Calibration Calculator for Turf
    The Greenleaf Technologies' Quick Check Calibration Calculator for Turf allows fast and accurate calibration and testing of golf course sprayers.

    Download Instructions
    QC02G